Landtone Klon Centaur Clone Kit Guide [Fix]

Let me preface this by saying I am not throwing anyone under the bus here, I'm just stating a fact. As I browse r/diypedals, I find that the Landtone Klon Centaur Clone overdrive kit comes up often. A majority of the time the person is seeking help with their build not having output. The issue here is there is a guide online that most people follow, since the instructions included with the kit are useless, that has a mistake in it. I myself used this guide and came up with the same results of no output. Frustrated, I started to remove the cables from the pedal while the amp was still turned on. As the tip of the cable came out of the jack it scraped against the right part, allowing me to hear my guitar. This told me the wiring on the jack was done wrong. All I needed to do was swap two wires and everything worked perfectly.

Every time I see someone needing help with the Landtone Klon clone kit I post an image of my known working wiring because I understand how frustrating it is to build a kit and it not work. It's even more frustrating when a guide is put online and it's WRONG. Which leaves most novice builders completely in the dark as to what happened to their build, and possibly ruining their first experience building a pedal. Which may also ruin them ever wanting to try again. I will provide an imgur link as I don't think blogger will support such a large image. So, if you've purchased a Landtone, or Landtone style kit from TTone or ProLandtone, etc. and your build has no output, check the image provided below. The main problem will be the top jack on the righthand side of the image. The wiring is colored different to make things a bit easier to follow. Hopefully this will help people, maybe even so much so that GuitarGearFinder will fix their guide, or post a correction of some sort.

Correct Landtone Klon Clone Image

After publishing this I went back through and noticed they acknowledge they wired it wrong in the "guide", but they still got it wrong in the image, even though they claim it's corrected. Please note: The image below is the incorrect way to wire the output jack.

The Grey Wasp

 Since I've owned my DOD YJM 308 for so long it began to make me wonder what an original grey DOD 250 sounded like in comparison. Now you can listen to all the youtube videos you want but it's not the same as having them side by side in your personal possession to compare. Since I wouldn't even know where to begin to find one to even borrow I decided I would try my hand at building a clone. I fully understand a clone isn't going to sound exactly like the original, but it should get me somewhere close.

The standard process begins with me looking through layouts online to find one I feel the most comfortable building. Next comes searching for all the parts to put the thing together, followed by cutting down the board and adding the parts, etc. etc. The day came when everything was done. I plugged the pedal in and.. silence. Nothing but pure, low-grade hum and absolutely nothing more. Since the bypass worked I knew it wasn't wired up completely wrong. After checking over it a few times I decided it was best to tear the build all the way back down to the board and test every single component. One at a time.

Since my work station is outside I had a few incidents while testing and rebuilding. First there was a gust of wind that blew some of the parts off the table I work on, losing them forever. Secondly, and this is how the pedal got its name, while doing some soldering I heard a rather loud thud on my table. When I looked up to see what it was, there was a large black wasp with a dead green caterpillar. Omen or miracle? Who knows, but as the original 250 was grey and the clipping on this is rather sharp, like a sting, I figured I would name my build the Grey Wasp.

I have no clue what a real DOD 250 is going to sound like, but after I finally got this thing to work I was rather impressed with how it sounded more or less like the 308. My firm belief is the 308 was focused on helping fans of Yngwie get his tone through a single pedal, instead of being just another 250 pedal clone. If someone really wanted Yngwie's tone they would already own a 250, wouldn't they? Anyhow, since the Grey Wasp does sound fairly similar to the 308, I'll assume that means it sounds fairly close to a grey 250, and I'm ok with that.