Adventures in Guitar Pedal Building: Part 2

In part one I had just begun dabbling with building guitar pedals. Since then I've built my TS808 clone, my DOD 250 clone, and I've also fallen out of love with my LPB-1 Boost clone. I did build the board for another boost circuit, but haven't put it into a housing yet. Since all of that I've also built a MXR Distortion Plus as well as a Marshall Guv'nor clone, with my final officially planned build being a compressor pedal.

I've genuinely had a great time building pedals. I've learned a lot about building pedals and how to fix my own mistakes. As time has passed I find myself worrying less about all the little details and just focusing on putting the parts in the right places and getting it all soldered up. I also find myself building pedals with a bit of a theme. You see, some of my favorite guitarists are Randy Rhoads, Gary Moore, Stevie Ray Vaughan and Yngwie Malmsteen. If you look at the pedals I've built you'll see they reflect pedals famously used by those guitarists. Was this intentional? Yes.

So how do I feel about the pedals I've build so far? Well, I still absolutely love my TS808, but I do feel it's really best suited for single coil pickups, as it gets a bit woofy when used with humbuckers. I feel my DOD 250 is a bit noisy, so I may build another board using metal film resistors and preserve my original build. I feel my MXR Distortion Plus is lacking something and is also a bit noisy, so it may also get the metal film resistor treatment. My Marshall Guv'nor build seems pretty good, but I haven't really had much time to use it and become familiar with it. And last, but certainly least, I've fallen out of love with my LPB-1 boost because it thickens up the tone and it just makes everything sound horrible.

As I said earlier my final planned build is a compressor pedal and a few alternative boards to see if they make the pedals sound cleaner, or better. I will preserve the original boards as parts of my progress in the hobby of guitar pedal building. I have tons of parts left over, so I'm sure I'll find something else I want to build and get back to it, but for now I'm satisfied with what I've built, it's just a matter of making it all work together. Heck, I might even build a Wah pedal. Actually, I really might do that.

Adventures in Guitar Pedal Building

At my age I often look back and get angry with my younger self for thinking we had all the time in the world to accomplish all the things we wanted to do. In my early twenties I wanted to go to luthiery school, an idea that I went so far as to seek out financial aid to make happen, but I never took it seriously. In 2013 I purchased my Kalamazoo Model 1, an amp I have grown more and more enamored with the more I play through it, and waited six years to actually repair it. In the mid-2000s I wanted to start building my own effects pedals after I ran across the BYOC website offering DIY guitar pedals kits at, back then, extremely cheap prices. At the time of writing this there is a three year old draft in my blog account about a DIY ABY box I had planned and even put together, but never once did I actually solder anything inside of it.

Sadly, I feel the time for most of those things has slipped away, but has it? You see, this is the year 2020, a year that has put the world at an almost complete standstill, a year that should teach each and every one of us that the time to do what you want is NOW, and not a day later. At the beginning of the new year I toyed with the idea of building my own guitar pedals, but again I felt I should just put it off and wait, like everything else I've wanted to do. Something within me awoke and  told me I better take charge of that and make it happen before it becomes just another regret. I decided the least I could do was purchase some basic parts from Amazon, such as: LED holders, input/output jacks, potentiometers, knobs, solder-in sockets for component testing and some DPDT foot switches to test true bypass wiring without LEDs.

The next thing I needed to do was find the easiest pedal to build and see if my parts bin had what I needed. After some research I found the Bazz Fuss seemed to be the easiest guitar pedal to build, and my parts bin had pretty much everything I needed, except not the exact same transistor. After throwing the pedal together I tested it out and even though I actually despise Fuzz as an effect I was pretty impressed. After tossing the thing into an old Sucrets tin I decided to call my creation "Fuzzy Throat".

I continued to build a few more Bazz Fuss circuits and none of them sound the exact same. Although all the parts are the same specs, again except the transistor, each component's varying makeup has its own unique way of coloring the signal. This has taught me the importance of trying different types of the same thing to see what happens. A beginner like myself would possibly be blown away by how much of a difference a ceramic capacitor, polyester capacitor or metal film capacitors can make on the overall sound of a pedal circuit.

While fiddling with my Fuzzy Throat pedal I somehow managed to ruin the diode, which turned it into essentially a boost pedal. Before I replaced the diode I played around with it as it was and decided it was time for me to build my first boost pedal. The circuit I ended up settling on was a clone of the Electro-Harmonix LPB-1 pedal. Four resistors, two capacitors and a transistor all put together from the layout I found online and I somehow managed to build an amazing boost that could lower the volume, boost the volume as well as throw my amp into overdrive. Again, I used transistors I had laying around, but the pedal works and I made sure to use sockets so I could swap out transistors.

Although I live with many things in my life I wished I had done, or done earlier, at least I finally managed to build some guitar pedals for myself. I'm also extremely glad that I fixed my Kalamazoo so I could test these pedals through a genuine tube amp. With the world being paused momentarily while we sort through many hardships in the year 2020, I'm glad I finally took the time to try something I had always wanted to do. Now that it's finally started I hope that it doesn't stop any time soon, and I hope this also opens the door to completing other things in my life I've left blowing in the breeze.

Two different Bazz Fuss builds.
Note the use of completely different parts
to see what sounded best.

Addendum June 21st 2020

Recently I purchased some 1590b style enclosures from Amazon (my first attempts at using real enclosures to house my pedals) and I'm actually quite happy with the results. I had previously purchased a 1590a style enclosure, but since I couldn't build a circuit small enough to fit inside comfortably I decided to just turn it into an A/B line selector. At this point I've created two fuzz pedals, although I'm not finished tinkering with the way I build and modify the circuits so I can get the most out of them, as well as two EHX LPB-1 boost clones and the aforementioned A/B line selector. Once I create a fuzz circuit that I like I will use my final 1590b enclosure for that.

From Left to Right: A/B Line Selector, EHX LPB-1 Clones
with blue and orange LED, Joy Fuzzer (play on Joy Buzzer)
and finally Fuzzy Throat.